Icynene Attic Cleaning & Rodent Proofing in Cedar Park: What to Know First
We provide independent Icynene attic cleaning and rodent proofing in Cedar Park, with most jobs completed in one to two days and a written price delivered before any work starts. Typical attic cleaning and rodent proofing for Icynene systems runs $1,800 to $4,200 depending on contamination level and access complexity. Call (737) 245-6428 for a free estimate with exact numbers.
This page is for Cedar Park homeowners who installed Icynene open-cell or closed-cell foam and now face rodent damage, soiled insulation, or compromised attic conditions that require cleaning and re-sealing. We are an independent Icynene service provider, not affiliated with or authorized by Icynene, and we work on Icynene LD-C-50, MD-C-200, and other common lines found in Cedar Park homes built between 2015 and 2023. Wes Okafor brought blower-door discipline from Chicago’s building science program to Central Texas, and our crew has handled Icynene retrofits across Cedar Park including the Buttercup Creek subdivision where summer attic temperatures hit 140°F and accelerate foam degradation.
How Icynene Products Fail - and How We Fix Them
- LD-C-50 open-cell sagging in Cedar Park’s heat. This entry-level open-cell foam can pull away from roof decks when attic temperatures sustain 130°F-plus for weeks each summer, which is standard in Cedar Park from June through September. The gap creates a thermal bypass and collects rodent nesting material. We remove the compromised sections, clean the substrate, and reapply only after verifying the roof deck ventilation path with a smoke pencil. We document the before-and-after gap dimensions in your photo record.
- MD-C-200 closed-cell odor retention after rodent infestation. The higher density of this medium-density closed-cell line traps urine and organic matter in the foam matrix where surface cleaning cannot reach it. Homeowners in Cedar Park’s Ranch at Brushy Creek and Shenandoah subdivisions have called us when the HVAC return pulls attic odor through recessed can-light penetrations. We excise the contaminated foam to solid substrate, apply enzymatic decontamination, and replace with new MD-C-200 or discuss alternatives if the original application was substandard thickness.
- Classic Series shrinkage at top plates and electrical penetrations. Early Icynene Classic installations in Cedar Park sometimes experienced 2-5% linear shrinkage as the foam cured against hot OSB in unvented attics. The resulting cracks at top plates and wire holes become rodent highways. We don’t caulk over shrinkage cracks; we cut back to sound foam, clean the cavity, and refoam with proper lift thickness to prevent recurrence. Your written scope specifies the lift depth and cure time before we close.
- Water staining on Icynene from roof leaks that went undetected. Foam’s water resistance is a benefit until it hides a slow roof leak for two years. By the time Cedar Park homeowners see ceiling staining, the Icynene has wicked moisture deep into the assembly and mold has colonized the back side. We remove the affected foam in controlled sections, inspect the roof deck with moisture meters, document the readings, and coordinate with your roofer if the leak source is still active. The photo record includes moisture meter readings at 12-inch intervals.
- Retrofit compatibility: Icynene over existing fiberglass in older Cedar Park homes. Some 1980s and 1990s homes in Cedar Park’s original neighborhoods received Icynene spray foam over existing fiberglass batts without proper cleaning or air sealing first. The trapped fiberglass compresses, rodents nest in the void, and the assembly performs worse than either material alone. We remove the entire hybrid assembly down to the drywall, clean and sanitize, seal all top plates and penetrations with blower-door guidance, then reinstall correctly. Seal the leaks first. Then insulate. The order matters more than the product.
Our Icynene Attic Cleaning & Rodent Proofing Process

- 1
Pre-work blower-door test and written price. We pressurize the house to measure ACH50 - the air changes per hour at 50 Pascals pressure - and identify where your envelope leaks. You get the written scope, the price, and the warranty before anyone enters the attic. No exceptions.
- 2
Contamination assessment and documentation. We photograph every Icynene surface, mark rodent entry points with GPS-tagged locations, and test foam density with a core sampler to confirm which Icynene line was originally installed. This determines whether OEM-spec replacement foam or compatible aftermarket product is appropriate.
- 3
Controlled removal and HEPA-contained cleaning. We section the attic with plastic isolation barriers, run negative air machines, and remove contaminated Icynene with specialized cutting tools that don’t tear adjacent sound foam. All debris is bagged in the attic, never dragged through living space.
- 4
Substrate decontamination and rodent exclusion. We apply enzymatic treatment to wood surfaces, seal all penetrations with copper mesh and foam compatible with your existing Icynene chemistry, and install rigid metal flashing at known rodent access points. Every sealed point is photographed.
- 5
Replacement, post-work blower-door test, and photo record delivery. We reinstall Icynene or discuss alternatives if your original application was flawed. The post-work blower-door test shows your new ACH50 number. You receive the documented photo record, both blower-door readings, and the 365-Day Done Right Promise in writing before we leave.
What Icynene Attic Cleaning & Rodent Proofing Costs in Cedar Park
| Scenario | Typical Range |
|---|---|
| Light cleaning, spot rodent exclusion, intact Icynene | $1,800 - $2,600 |
| Moderate contamination, partial foam removal, reapplication under 200 sq ft | $2,600 - $3,800 |
| Heavy contamination, full attic strip, complete Icynene replacement | $3,800 - $5,500 |
| Roof leak damage with deck repair coordination | Add $800 - $1,500 |
Three factors move the price: how much Icynene must be removed versus cleaned in place, whether rodent exclusion requires roofline work or just interior sealing, and if the original foam was applied below manufacturer thickness and needs full replacement to perform. We also service Reflectix radiant barrier systems when they’re part of the same attic assembly. Every estimate is free, written, and binding - no open-ended allowances. Call (737) 245-6428.
Why Cedar Park Homeowners Call Topside Attic Insulation Cedar Park for Icynene Work

We’ve sealed and insulated over 9,000 homes since 2016, every one with a written price first and a documented record at completion. Our technicians are background-checked, uniformed, and trained on Icynene’s specific cure profiles and failure modes - not generic foam knowledge. The 365-Day Done Right Promise applies to all Icynene work: if the rodent exclusion fails, if foam delaminates, if odors return, we return and make it right with the written warranty as our guide.
Calls are answered by a live person 24/7. We publish before-and-after blower-door numbers on every applicable job so you can verify the air-sealing result yourself. And if you have a competing estimate for Icynene attic work, bring it - we offer a Free Second Opinion and will read it with you line by line.
FAQs
No, but only if the work is performed by technicians who understand Icynene’s chemistry and document their process. As an independent Icynene service provider, we use foam-compatible cleaning agents and replacement products that match the original specification, and we photograph every step so any future warranty claim has supporting evidence. Call (737) 245-6428 to discuss your specific installation date and product line.
Most Cedar Park jobs finish in one to two days; heavy contamination requiring full foam removal may extend to three. We don’t rush the cure time between foam lifts, which is why we schedule accordingly and text you when the crew is en route. Your written scope includes the day-by-day timeline before work starts.
Spot repair works when less than 20% of the attic area is affected and the original foam density and thickness meet spec. Beyond that, partial repairs create thermal bridges and air gaps that compromise the envelope. We test with a core sampler and tell you which path the blower-door numbers support. The written price covers either scenario with no hidden escalation.
We source Icynene OEM foam and also carry compatible aftermarket closed-cell and open-cell products from Demilec and other manufacturers when the original line is discontinued or when budget constraints apply. Your written scope specifies exactly which product goes where, with no proprietary lock-in. We also work with Reflectix radiant barriers when they’re part of the assembly.
You receive a Documented Photo Record of all work areas before, during, and after; the before-and-after blower-door test results in ACH50; the written warranty under our 365-Day Done Right Promise; and a final walkthrough with the crew lead. Every Cedar Park job closes this way - it’s Haven Standard Clause 1 in practice.
Ready for a written price? Call (737) 245-6428. A live person answers, and your free estimate includes exact numbers for your Icynene attic cleaning and rodent proofing in Cedar Park.
Written by Wes Okafor, Owner, Topside Attic Insulation Cedar Park at Topside Attic Insulation Cedar Park, serving Cedar Park and nearby areas.